How To Reset Samsung Refrigerator Filter Light

The majority of Samsung refrigerators are equipped with filter lite indications, which alarm the user when the water filter needs to exist inverse.

It also means that later on replacing the filter in the Samsung refrigerator, you volition need to reset the filter calorie-free in the appliance.

But why is this the case?

Generally speaking, the maximum number of months that a h2o filter tin can be used is six.

Nevertheless, depending on the type of water that passes through the waterline, it may be necessary to supervene upon the waterline.

Consider that if the water is difficult in your area, you lot may need to supersede the filter within 3 to four months of installing it.

Y'all will not be able to determine that your filter needs to be changed until you find a deviation in flavour, which you would not notice without the filter light.

Samsung DA29-00020B, HAF-CIN/EXP Premium Refrigerator Water Filter (White, 2 pack) — How to Reset Filter Light on Samsung Fridge

Run into Also:

How to Reset Your Samsung Refrigerator

Samsung Refrigerator Noise Stops When Door Open

Samsung Refrigerator Warranty

The Operation of the Samsung Water Filter Indicator

When the h2o filter is still in expert working order, the Samsung water filter displays a blue or green hue, depending on the model y'all have installed.

When information technology has been in the water for 5 months or 450 gallons, the color turns orange or low-cal pinkish.

This color shift is oftentimes an indication that it is fourth dimension to replace the water filter organization.

Your water filter indicator volition plough red afterwards 6 months or 500 gallons of water accept been used.

When you find this red calorie-free, information technology's time to replace the water filter.

The longer you wait, the more likely information technology is that you will see particles in your drinking water.

Furthermore, you volition need to change your water filter more frequently than every 6 months if you live in a region where there is excessive limescale in the water supply.

Filter indicator and ice type and filter change button are highlighted in blue from menu in the refrigerator

Indicator for the presence of a water filter

In gild for the h2o filter indicator lite to turn orangish afterwards v months or 450 gallons of water, then ruddy after half dozen months or 500 gallons of water, information technology must starting time turn orange.

The color of the low-cal depends on the model you lot have. Information technology might be either green or blueish.

Information technology is necessary to locate the multi-role button(southward) on your display that controls the water filter indication in order to restore it to its default setting.

Then push button and hold the button(s) for a few seconds until the light turns green.

Exemplifications of Various Models

NOTE:

The models depicted in the photographs below are only a few samples of a variety of designs.

Y'all should examine the display screen on your refrigerator and seek characteristics that are comparable to these.

What y'all need to know about how to reset the filter light on a Samsung refrigerator (steps to follow on different models)

When using a Samsung refrigerator, you must hold downwardly the FILTER RESET push button for approximately ii seconds in social club to turn off the cerise filter icon on the door.

If you are unable to locate the FILTER RESET push button on your refrigerator – which is typically located on the dispenser controls – consult your possessor's transmission for help (on the front of your fridge).

In order to operate other models, you must printing and hold down either the "WATER FILTER" button or the "Ice/Water" button for 3 seconds.

Now, because the Samsung refrigerator water filter reset technique differs from model to model, we've explained the correct Samsung refrigerator water filter reset approach for each model in the following sections to help you get back on track (typical steps).

Samsung refrigerator model RF28K9070SR has a filter reset.

To reset the filter on your RF28K9070SR model, press and hold the ICE-MAKER button for approximately three seconds after turning it off.

The filter indication will exist reset as a event of this action.

Resetting the filter light on a Samsung model RF23J9011SG/AA – instructions

The CRUSHED/Agree button on your RF23J9011SG/AA must be held down for iii seconds in order to reset the water filter low-cal.

The color of its indicator should transition from red to OFF instead of staying on.

Steps for resetting the h2o filter on a Samsung refrigerator with a French door blueprint Samsung refrigerators, such as the Samsung refrigerator RF260/BEAESR/AA, are available.

Afterward installing a new water filter, printing and hold downwardly the Alarm/HOLD selection for 3 seconds to turn off the cherry warning calorie-free that has shown.

Please go along in mind that, for devices with internal controls, y'all must push and hold down the buttons Refrigerator+POWER COOL (at the same time) for a total of three seconds.

Model DA29-00003G of the Samsung fridge has a filter reset low-cal.

To reset a replacement warning calorie-free, press and hold the Alarm/HOLD push for three seconds while the calorie-free is off.

Model number RF24R7201SR/AA of the Samsung refrigerator.

If you take recently replaced the filter in your Samsung RF24R7201SR/AA refrigerator, pushing and holding the FILTER RESET button (for iii seconds) should plough off the reset signal on the refrigerator.

Samsung refrigerator water filter reset RF28K9070SR/AA

The CRUSHED Water ice push button must exist pressed and held downwards for iii seconds in order to articulate the water filter message.

RF23J9011SR is the Samsung refrigerator filter reset code.

If you take a Samsung fridge with model number RF23J9011SR, press and hold the push button "CRUSHED/HOLD" for three seconds to reset the water filter alarm.

RF263BEAESR is the Samsung refrigerator filter reset lawmaking.

The following procedure should be followed if your RF263BEAESR Samsung refrigerator h2o filter does not reset automatically:

For iii seconds, press and hold the ICE TYPE/WATER push on the controller.

Instructions for resetting the Samsung RF28R7351SG h2o filter (applies for most iv doors Samsung refrigerators)

The CRUSHED Calorie-free INDICATOR push must be pressed and held downwardly for three seconds in guild to reset the alert betoken.

If the reset lite signal does not turn off, there are some other options to endeavour.

In a nutshell, if replacing a new filter did not consequence in the ruby light turning off, yous can also attempt the following:

Check to see whether whatever of the buttons are locked.
Make certain that the buttons are truly "unlocked," or else the Samsung fridge filter reset operation will non office properly.

For the methods on how to unlock the controls, you can refer to your handbook book once more if you require them.

Ensure that the filter seating is correct.

Information technology is possible that the filter alarm light is notwithstanding blinking because the newly installed filter was not properly placed. Open the door, look at the plumbing equipment, and make certain it's exactly in place.

Check to run into that the proper filter was installed.
If you did not utilize a legitimate product, the light notification may not get away, and you may demand to swap out the replacement filter to get it to work again (as a last resort).

OUR Concluding THOUGHTS

We hope yous accept gained a improve understanding of how to reset the filter light on a Samsung refrigerator (and probably you have already gotten rid of the alarm).

One final point to mention: near Samsung refrigerator models are equipped with a "LOCK" button, which is used to lock the controls, and it is frequently this button that is at a fault when the Samsung fridge water filter low-cal does not plow off when y'all try to plough it off.

It volition exist necessary for you to unlock the controls in lodge for the water filter light to exist successfully reset; thus, try to concord down the flashing LOCK button for three seconds and and then retry the process.

Naturally, the unlock technique varies from model to model, and then if the steps outlined in a higher place do not work, consult your handbook for the right approach.

Oftentimes Enquire QUESTIONS

The filter light on my Samsung refrigerator won't turn off. What should I do?

The majority of the time, the technique to do a Samsung refrigerator water filter reset consists of pressing and holding down either of these buttons for three seconds each.

The FILTER RESET button is located on the right-hand side of the screen.

The "WATER FILTER" button or the "ICE/WATER" push are both available.

Still, if your Samsung refrigerator filter light does not reset, first check to see if the buttons take been locked and and then unlock them before attempting again.

What is the procedure for turning off the filter low-cal on my Samsung?

It is necessary to locate the multi-function push button(s) on your display that controls the h2o filter indication in order to restore it to its default setting.

So push button and hold the button(south) for a few seconds until the light turns green.

What is causing my Samsung refrigerator's filter lite to not reset?

If the light does not reset after several attempts, contact a professional to service the filtration system.

One time you have replaced the filter with a new 1, the indicator light should return to its original blue color and function properly.

The red filter indicator on your Samsung refrigerator volition not plow off unless you reset it manually.

Hello, I'm Khelly! I am your tech skilful for all your Samsung Products and Information needs. Life is complicated then, finding solution to your tech issues shouldn't exist. Let me help you with that!????