How Many Psi Does A Garden Hose Have

Stinson Crid1981 · Sunday, December 19, 2021

08-05-2011,06:15 PM #1

Newbie Member

Normal psi for standard water hose?

Hey everyone, after we buy our enclosed trailer we are wanting to do mobile detailing out of it. Right now we have a Troy Built TB3000 XP pressure washer (don't hate. lol) to do dealership spray off's. However, once we start mobile detailing, I want to very rarely use the pressure washer and only use it when needed. We will have a 250 gallon tank with a standard garden hose size hose coming off of it. But the tank is basically gravity fed, so if I were to put a nozzle on the end of it, no pressure would come out the nozzle and the water will just drip out the nozzle. I was at Lowes last night and came across this. Say's that it boost's water pressure to 40psi. It would basically be gravity fed on one side and then after the pump it would have pressure. However, is the pressure too much for a garden nozzle? Any thoughts or opinions? There will also be a generator on board for the pump to plug into and I'm sorry if this is the incorrect placing of this question on the forum! Thanks in advance!
Shop Utilitech 1.5-HP Cast-Iron 24 GPM Transfer Pump at Lowes.com
08-05-2011,06:41 PM #2

Junior Member

Re: Normal psi for standard water hose?

40 psi should be fine. FYI, normal house pressure is around 40-70 psi.
08-05-2011,06:54 PM #3

Newbie Member

Re: Normal psi for standard water hose?

When you have a garden hose nozzle on the end of regular garden hose, does the nozzle regulate the pressure when not in use and the water turned on? Do you think the pump will regulate itself and not burn up?
08-05-2011,07:11 PM #4

Super Member

Re: Normal psi for standard water hose?

Nozzle regulate the pressure...wha? That looks like a centrifugal pump, so it should be alright deadheaded for short durations.
08-05-2011,07:24 PM #5

Newbie Member

Re: Normal psi for standard water hose?

Originally Posted by Setec Astronomy

Nozzle regulate the pressure...wha? That looks like a centrifugal pump, so it should be alright deadheaded for short durations.

I'm sorry, but I don't understand your statement, I'll try to reword it since it seems all kinds of confusing.
When you are at home with your garden hose turned on and a nozzle on the end of it, when you're not using it, what keeps the nozzle from blowing off the end of the hose? Would this be ideal to use to wash cars on a daily basis, or is there an alternative solution?
08-05-2011,08:39 PM #6

Junior Member

Re: Normal psi for standard water hose?

The static pressure is what in the water line when the hose is shutoff, this is usually between 40-70 psi in a residential setting. Depending on the supply pipe size when you open the hose and let it flow the pressure will drop and this is known as the residual pressure. The more restrictive the hose (ie smaller diameter, long lenghts...) the more the pressure drop will be. At the very minimum a residual pressure of 20psi is desired. I think what you are asking is that if it would be ok to have the pump on with the hose shutoff. This should be ok for short periods of time but i would not let it run continuosly like that for extended periods. If it's just a matter of one minute on, two off that should be ok. If you're not going to use it for say 5 minutes then I would kill the power. A lot of times the water flowing thru the pump will cool it, so if water is not flowing the pump could overheat.
BTW looking at the specs of that pump it should be fricken awesome. 24gpm is a hella lot of flow. Most hosebibbs are only around 5gpm. disclaimer...they don't state the TDH (total dynamic head) of the pump so that rating of 24gpm could only be at the outlet port of the pump and not what you will be getting at the end of the hose.
08-05-2011,08:52 PM #7

Junior Member

Re: Normal psi for standard water hose?

Deadheading is gonna be a problem. With no way for water in the pump to escape the water will just churn & churn heating up very quickly. Like in seconds. Steam then will at least blow the hose or the seals if not melt the pump.
The ideal way to deal with this is with a pressure tank like on a well. They come in small sizes. Or laking that, some type of flow sensor on the outlet of the pump that will shut the pump off when flow stops.
08-05-2011,09:16 PM #8

Newbie Member

Re: Normal psi for standard water hose?

When I was looking at the Lowes website, they also had small pressure tanks for sale.
What is the pressure tanks purpose and how would it attach to that pump?
08-05-2011,09:21 PM #9

Super Member

Re: Normal psi for standard water hose?

Originally Posted by DHCrocks

The static pressure is what in the water line when the hose is shutoff, this is usually between 40-70 psi in a residential setting. Depending on the supply pipe size when you open the hose and let it flow the pressure will drop and this is known as the residual pressure. The more restrictive the hose (ie smaller diameter, long lenghts...) the more the pressure drop will be. At the very minimum a residual pressure of 20psi is desired. I think what you are asking is that if it would be ok to have the pump on with the hose shutoff. This should be ok for short periods of time but i would not let it run continuosly like that for extended periods. If it's just a matter of one minute on, two off that should be ok. If you're not going to use it for say 5 minutes then I would kill the power. A lot of times the water flowing thru the pump will cool it, so if water is not flowing the pump could overheat.

BTW looking at the specs of that pump it should be fricken awesome. 24gpm is a hella lot of flow. Most hosebibbs are only around 5gpm. disclaimer...they don't state the TDH (total dynamic head) of the pump so that rating of 24gpm could only be at the outlet port of the pump and not what you will be getting at the end of the hose.

DHCrocks very good explination. The only thing I would add is the friction loss for the hose is not figured in or listed so I would also say it's at the discharge side of the pump as you said.
bshattuck87, don't confuse GPM's and PSI. Most power washers only run at 2GPM or less so you should have plenty of water supply. If you use a good quality hose and nozzle it's not going to blow off. You may want to rethink the size of the supply hose feeding the pump though. You should use the largest supply hose you can and the reduce it down at the pump. The pump can only put out what you put in so don't restrict it with a small supply line. As others have already said dont run the pump any longer than you have to without water flowing.
08-05-2011,09:30 PM #10

Newbie Member

Re: Normal psi for standard water hose?

Hmmm... This doesn't sound like an ideal way to make it work. Any other suggestions to be able to use a garden hose and nozzle with a mobile business?